Amethyst transformer design and transformer manufacturer

Amethyst Designs Atlas

Amethyst Designs Ltd
47/48 Viking Way, Bar Hill
Cambridge, CB23 8EL
England
Tel: +44 (0)1954 - 789696
Fax: +44 (0)1954 - 789662
transformer design Amethyst-designs © 2017 Manufacturer & design of transformers and wound components

Our News - Archive

amethyst and zeta transformer news

hr

Amethyst Designs Limited successfuly accredited to new ISO 9001 and ISO 14001 standards

Amethyst Designs Limited are pleased to announce that they have been accredited to the new BS EN ISO 9001 Quality Management System standard. They have also been accredited to the BS EN ISO 14001 Environmental Management System standard.

You can see the official documents here:

hr

Amethyst Designs & REACH Compliance

Read the full letter here. [PDF]

Amethyst manages its supply base through its documented quality and environmental management system via approved suppliers. The manufacture of transformers and coils of course requires the use of various solvents and resins but all of these are standard industry products that are not imported or manufactured specifically for us.

Amethyst Compliance Status

Under the regulations, we are considered downstream users. We believe that to the best of our knowledge, all substances within the products we sell have been identified and our suppliers have been contacted to confirm that all substances are registered by our supply base where appropriate.

In view of this we do not believe we have any further direct obligations under REACH Regulations. We do, however, recognise our continuing role in achieving full compliance with the legal requirements of REACH. This we will do via communication of information to relevant suppliers and stakeholders regarding volumes and usages of the substances in the products we supply. We will review this on an annual basis.

If you require any additional information please do not hesitate to contact me.

Paul Wealleans,
Operations Director.
paul.wealleans@amethyst-designs.co.uk

hr

Milan Vjestica, formerly of Walsall Transformers and Clairtronic / Dagnall Electronics joins Amethyst Designs.

January 2010

We are pleased to announce that Milan Vjestica has joined Amethyst Designs.  The modern facilities and approvals at Amethyst  are most suitable for the continued manufacture of  products for the customers that Milan brings with him.

Milan has over 30 years experience in the transformer industry,  having built up a loyal customer and supplier base. He has knowledge of mains laminated, high frequency ferrites, and toroidal transformers and is able to offer customers a full technical sales/design service from initial design concept/enquiry through to full after sales care.

Milan's design experience also adds to our already strong design team to provide full technical support for all Amethyst customers.

Milan has considerable expertise in design and manufacture of higher volume transformers and coils. This enables Amethyst to offer the full one stop service from design concept to high volume supplies at competitive prices.

Amethyst are also able to offer equivalent products for the catalogue style range of products that were previously offered by Walsall Transformers and Clairtronic / Dagnall Electronics.

Milan can be reached directly by phone on 0121 286 1435 or via his new email address  milan@amethyst-designs.co.uk.

In his absence either Paul Wealleans, Operations Director, or Ann Ray, Customer account manager will be able to assist by calling our main office.

hr

Grant Armstrong, formerly of Morite, Joins Amethyst

October 12th, 2009.

From today Grant Armstrong will be part of Amethyst Designs.  The placing into Administration of Morite Windings Limited by their ultimate holding company earlier this month precipitated this. The modern facilities and accreditations at Amethyst  are most suitable for the continued manufacture of Morite products and we foresee no discontinuity.

Grant's remit is to be responsible for the manufacture and quality control of Morite Windings wound components and to provide technical support for all Amethyst customers.

Grant can be reached directly by phone at Amethyst or via his new email address  grant.armstrong@amethyst-designs.co.uk.

In his absence either Paul Wealleans, Operations Director, or Andrew Greavett, Production Director, will be able to assist.

hr

Amethyst wins Gold Standard Award as a Supplier to Mars Drinks

Amethyst is proud to announce that we have been awarded the Mars Drinks Gold Standard Award for Quality Performance in 2008. 

The Gold Standard Award was launched several years ago and highlights the need for robust quality management systems combined with consistent quality conformance and delivery performance.

The Gold Standard provides recognition of the fact that, as a supplier, we have helped Mars Drinks to build quality excellence into their brands through capable supply. 

Download the Award certificate [70KB PDF].

hr

New address for Tranilamp Transformers

December 2008

Following the recent communication you will have received from Bill Brown/Jeff Putnam at Tranilamp I am delighted to confirm that all Tranilamp Transformers will now be manufactured by Amethyst.  The following will provide the necessary information for you to update your internal systems.

With immediate effect all orders  for Tranilamp Transformers should be sent to the address shown above.  Stock will be held here and available to despatch from Wednesday 17th December. 

Please enter Amethyst’s details into your purchase ledger system as the supplier of Tranilamp Transformers.  Your contact here is either myself or Andrew Greavett (Production Director).  Bill Brown and Jeff Putnam remain involved and can be reached on their normal numbers.

Price, delivery, product codes and terms & conditions remain unchanged.  Specials will be handled and produced exactly as before.   

Invoices will be raised by Amethyst and cheques should be made payable to Amethyst Designs Limited.  If you wish to pay by BACS please contact Julie Barnikel (admin@amethyst-designs.co.uk) who will supply our bank details. 

Myself and my colleagues look forward to speaking to you in the near future.

Please do not hesitate to contact me (paul.wealleans@amethyst-designs.co.uk) if you require any additional information.

Yours sincerely,

Paul Wealleans
Operations Director

hr

Zeta Windings Have Moved!

Following the announcement on the 5th Febuary 2008 that Zeta Windings Limited has merged with Amethyst designs Limited please can you ensure that your records have been updated accordingly:

New enquiries and quotations – Paul Wealleans - paul.wealleans@zeta-transforners.com

Order Progressing – Andrew Greavett – andrew.greavett@zeta-transformers.com

Technical – Ian Blunsten – ian.blunsten@zeta-transformers.com

Administration & Accounts – Julie Barnikel – admin@zeta-transformers.com

Chris Petri continues to work for Zeta Windings, particularly in respect of transformer and wound component design and development, and can be contacted via either of the following:

chris.petri@zeta-transformers.com
Isleworth office number: 020 8568 6875

Thanking you in advance

Paul Wealleans,
Operations Director

 


Toroidal transformers -Toroidal transformer design - Laminated transformers - Laminated transformer design

Transformer design
Transformer design & transformer manufacturer

Amethyst transformers are manufactured to international standards -  Medical BS EN 60601, Technical Equipment BS EN 60950, Safety Isolating BS EN 61558 (60742) we have full trace ability of production using UL-approved materials.